Let us start with making bootable Mac OS X on Windows. Follow the instructions below:
1) Download PowerISO + Crack – Torrent OR Link Buddy Download
2) Install PowerISO
3) Click on Open and select your DMG or ISO file.
4) Click on Tools --> Create a bootable USB.
5) Select your device to install it on.
6) Click on Start and wait until it finishes ( for 4.5 GB it takes about 3/5 minutes....)
7) Congratulations! Now you have a bootable USB media.
P.S: If it does not work by selecting F12 at boot prompt, modify the BIOS to boot the USB.
In case the above instructions fail you, try the following.
1) File –> Open --> Select your dmg/iso file.
2) Right Click on USB device --> Format with disk image and select your disk image.
3) Start format and wait...
4) You now should have your Mac OS X bootable USB!
Making USB Bootable On Mac OS
1) Open Disk Utility
2) Select the USB you want to make bootable
3) Click on Erase --> Format: Mac OS Journaled Name: whateveryouwant
4) Wait until it finishes erase....
5) Click (on the left) your USB media you have just formatted then click Restore
6) For Source: Click on Image and select your DMG or ISO image For Destination : drag the USB media from the left to the textbox
7) Click on Restore and wait..... it may take up to 10 minutes...
8) If you note that your file isn't bootable then download chameleon bootloader or chimera one and install it (with all customizations you need ) to your USB media....
No comments:
Post a Comment